RC Boat Fishing

Ever wish you could put your bait hundreds of yards beyond the breakers without having to cast it there? That’s exactly what the RC Surfcasting Sea Bait Boat is built to do.

Designed for serious surf fishing, the 3251F RC Fishing Boat lets you remotely deliver your bait and hook up to 500 meters from shore. With twin brushless motors, GPS, a built-in Toslon TF300 fish finder, and a 2.4GHz remote control system, this isn’t your average RC boat.

Put Your Bait Exactly Where You Want It

Load your bait and hook into the boat, drive it through the surf to your target location, and release it remotely. The GPS system lets you mark fishing spots and features a one-button return function, making it easy to bring the boat back to shore.

The boat also features a self-righting design, LED navigation lights, and a powerful twin brushless motor system capable of speeds up to 3 meters per second.

How to release the bait and hook

1

Open boat cover, put LiFePo battery inside, fix it with a velcro strap.

2

Use the battery plug to plug in the receiver power connector. the light on the receiver turns on( remarks: The transmitter shall turn on before the receiver turns on), then the control system is working.

3

Rotate the knob on the transmitter to C, the lock pin at the rear and bottom both withdraw into the lock.

4

Rotate the knob on the transmitter to B, the lock pins at the bottom and rear will extend to the end of the lock. The bottom lock is locked.

5

Rotate the knob on the transmitter to A, the pin of the rear lock will extend out of the lock, the bait hopper is opened, put the big bait with hook inside the hopper, then press the hopper cover to close to the hopper.

6

Insert the surf rod on the beach, use surf rod and surf reel with almost 500 meters line to connect the hook with bait in the RC boat.

7

Control the boat with bait to a spot 10 meters away from the shore. Press the button GPS (ON) on the transmitter for 5 seconds. Meanwhile, the corresponding green light is on for GPS (indicate that the original spot is memorized, it is also called the return spot.

8

After the boat drives to the desired spot, rotate the knob on transmitter from A to B, the back door will be opened, rotate from B to C, the bait and hook at the rear will be released. (The bottom will also have the release function) then you can enjoy the fun of fishing with a surf rod and surf reel.

9

Press any one of the 4 POSITIONING buttons for 5 seconds, the green light will turn on ( The boat has memorized the coordinate of this spot). We can later remote control the boat with hook or bait to the spot again as long as we press the corresponding positioning button. If you want to cancel the positioning of one spot, press the corresponding positioning button for 5 seconds.

10

Press the button GPS(RETURN) for 1 second, the boat will come back to the spot 10 meters from the nearest shore and stop there. As long as we pull or push the trigger or rotate the wheel from the transmitter, the boat will cancel the return automatically and turn to be controlled by humans. Once again if you want to start return automatically, you need to press GPS(RETURN)again. then the boat will return automatically. The 4 green lights on the transmitter will flash if the battery power is low, we need to control the boat back as soon as possible because the boat has the remaining power to drive for 500-800 meters.

Whether you’re targeting big reds, sharks, drum, or other Texas surf species, getting your bait farther from the beach can open up water that conventional casting simply can’t reach.